| 4 HR | DAY |
Air Chisel-Muffler Tool................................ |
| 10.00 |
Auto Buffer.............................................. | 14.00 | 19.00 |
Ball Joint Press......................................... | 12.00 | 16.00 |
Ball Joint Sockets...................................... |
| 5.00 |
Battery Charger........................................ | | 12.50 |
Bearing Splitter | | |
Large....................................................... | | 6.00 |
Medium.................................................... | | 6.00 |
| Small....................................................... | | 6.00 |
Cam Bearing Installer................................ | | 20.00 |
Coll Spring Compressor |
|
|
Outside.................................................... | 8.00 | 12.00 |
Inside...................................................... | 8.00 | 12.00 |
| MacPherson Strut...................................... | 10.00 | 15.00 |
Compression Tester................................... |
| 6.00 |
Cutting Torch............................................ | 35.00 | 45.00 |
Plus Oxygen @ 1.00 per #150 Used
Plus Acetylene @ 1.00 per #10 Used | | |
Engine Hoist w/leveler.............................. | 25.00 | 30.00 |
Engine Stand............................................ | | 7.00 |
Exhaust Pipe Expander.............................. |
| 6.00 |
Flaring Tool | | |
Double..................................................... | | 7.00 |
Single...................................................... | | 5.50 |
Hone - Engine Cylinder............................... |
| 14.00 |
Hub Socket, 4WD...................................... |
| 5.50 |
Impact Wrench |
| |
Electric 1/2".............................................. | 15.00 | 20.00 |
Air 1/2".................................................... | 18.00 | 22.00 |
Impact Sockets | |
|
3/8"......................................................... | | 2.00 |
| 1/2"......................................................... | | 3.00 |
| 3/4"......................................................... | | 3.00 |
| 1"............................................................ | | 4.00 |
| Jacks | | |
| Floor 2 Ton............................................... | 12.00 | 18.00 |
| Transmission | | |
| Auto......................................................... | 20.00 | 25.00 |
| Truck........................................................ | | 40.00 |
Hydraulic | |
|
| 20 Ton..................................................... | | 15.00 |
| 50 Ton..................................................... | | 25.00 |
Jack Stands per pair, 5 Ton......................... | 8.00 | |
| Pickle Fork............................................... | 6.00 | |
| Pop Riveter - plus rivets............................ | 5.00 | |
| Pullers | | |
| Axle........................................................ | | 10.00 |
| Crankshaft Puller...................................... | | 7.00 |
| Dent....................................................... | | 8.00 |
| Pilot Bearing............................................ | | 7.00 |
| Pitman Arm............................................. | | 7.00 |
| Slide Hammer......................................... | | 10.00 |
| Steering Wheel........................................ | | 7.00 |
| Universal 2 or 3 jaw.................................. | | 8.00 |
| Universal Large........................................ | | 12.00 |
| Ridge Reamer......................................... | | 7.50 |
| Ring Compressor..................................... | | 4.50 |
| Sockets | | |
| 1" Drive Ratchet or Flex Handle................. | | 8.00 |
| 1" Drive Sockets...................................... | | 4.00 |
| 3/4" Drive Ratchet or Flex Handle.............. | | 8.00 |
| 3/4" Drive Sockets................................... | | 3.00 |
| 1/2" Drive Ratchet or Flex Handle.............. | | 7.00 |
| 1/2" Drive Sockets................................... | | 1.50 |
| Soldering Gun......................................... | | 5.00 |
| Taps and Dies | | |
| U.S. National Flag or National Coarse.......... | | 6.00 |
| Metric..................................................... | | 6.00 |
| Torque Wrench | | |
| Inch- LBS................................................. | | 10.00 |
| 1/2"......................................................... | | 10.00 |
| Tubing Bender | | 6.00 |
| Valve Spring Compressor............................ | | 6.00 |
| Wrenches | | |
| Combination | | |
| to 1"......................................................... | | 3.00 |
| Over 1"..................................................... | | 6.00 |
| Over 2"..................................................... | | 7.00 |
